What the product is

Hager Design 10 8 way consumer unit bundle with Type 2 SPD and 6 selectable RCBOs is built around the Hager VML108SPDRK consumer unit and six customer selected Hager ADA series RCBOs. The board is a surface mounted Design 10 enclosure with round knockouts, a 100A switch disconnector incomer and a Type 2 SPD. The selectable outgoing protection is drawn from the Hager ADA reduced height RCBO family, covering ADA306G 6A, ADA310G 10A, ADA316G 16A, ADA320G 20A, ADA325G 25A and ADA332G 32A. On your site this works best as a configurable bundle, because the board stays fixed while the customer chooses the RCBO ratings needed for the outgoing circuits.

That distinction matters. The official Hager references identify VML108SPDRK as the board and the ADA references as the RCBO options. Your sellable website product is the bundle made from those verified parts. For customer facing copy, the safest way to handle that is to be explicit that the enclosure and RCBO family are fixed but the RCBO rating mix is selected by the customer. That keeps the page accurate and avoids implying that one exact circuit schedule is prebuilt into every order.

Verified bundle components

• Consumer unit reference: Hager VML108SPDRK
• Board family: Design 10 consumer unit
• Board format: 8 way, surface mounted, round knockout, one row, one rail
• Incomer: 100A switch disconnector
• SPD: Type 2 SPD reference in official Hager board listing
• Board dimensions: 98.2 x 297 x 100 mm
• Board material and finish: steel, pure white RAL 9010
• Board protection ratings: IP2XC and IK05
• Board use context: indoor use only, single accessible phase, no RCCBs in enclosure
• Included RCBO quantity in this bundle: 6
• Selectable RCBO references: ADA306G | ADA310G | ADA316G | ADA320G | ADA332G
• RCBO family characteristics: 1P, 6kA, B curve, 30mA, Type A, reduced height, compact single module

Why the 8 way bundle variant matters

The real buying difference here is not just that the board has surge protection. It is the combination of compact board width and six selectable outgoing RCBOs. VML108SPDRK is the smallest of the three bundle boards you asked for, so it suits jobs where the circuit count is modest and the installer wants to stay with a single row Hager enclosure that does not take up unnecessary wall width. At 297 mm wide it is notably more compact than the 12 way and 18 way alternatives, which changes the fitment decision in a very practical way.

The six RCBO positions in the bundle also make commercial sense for smaller schedules. A buyer who only needs a limited number of protected outgoing circuits can stay with the more compact enclosure and still choose the outgoing ratings required for the job. That is more useful on the page than pretending there is one fixed 6A to 32A schedule inside every bundle. The customer can configure the bundle around the actual circuit plan instead.

Board details that matter in practice

Hager identifies VML108SPDRK as a Design 10 surface mounted steel consumer unit with 8 ways, one row and one rail. The board is listed as suitable for indoor use only and carries IP2XC ingress protection and IK05 impact resistance. Hager also lists a 100A rated current, pure white finish and a full Design 10 enclosure format with round knockouts. For installers this keeps the specification clear. The page is not describing a generic metal box. It is describing a defined Hager consumer unit platform with the features that matter when choosing a board for a domestic distribution job.

Hager's Design 10 literature also places these round knockout SPD boards in the context of TT applications when RCBOs are used on all outgoing circuits, with the VA10MT cable clamp recommended as an accessory. The same catalogue identifies VM04CE as the standard meter tail cable entry plate for Design 10 boards and lists related accessories such as VM02CE and VAP00. That helps place the bundle within the wider Hager consumer unit ecosystem rather than treating it as an isolated enclosure reference.

RCBO selection and buying logic

The outgoing protection part of the bundle is intentionally selectable. Hager's ADA reduced height range is identified as 1P 6kA B curve 30mA Type A protection for final circuits from 6A to 32A. Using the selectable ADA306G, ADA310G, ADA316G, ADA320G, ADA325G and ADA332G options allows the website product to cover a range of common outgoing circuit ratings while staying within one verified Hager RCBO family. That is better than mixing families or implying compatibility with unverified alternatives.

From a buying point of view, that means the page can rank for the consumer unit bundle and still stay clear about the circuit protection options included. The board is fixed. The RCBO family is fixed. The quantity is fixed at six. The only configurable element is the exact rating mix chosen from the stated Hager ADA options.

Who this exact bundle suits

This bundle suits smaller single phase domestic boards, compact refurbishments, annexes, flats and other jobs where a single row SPD equipped consumer unit is needed but the outgoing way count does not justify moving to a wider enclosure. It also suits installers who want RCBO based outgoing protection and need the flexibility to choose 6A, 10A, 16A, 20A, 25A or 32A ratings at the point of order.

Why buy this exact variant

Choose this 8 way Hager bundle when the job needs a compact Design 10 round knockout consumer unit with Type 2 SPD and six customer selected Hager ADA RCBOs. The value in this exact variant is the verified enclosure specification, the genuine Hager ADA protection range and the simple buying logic of matching a smaller board width to a smaller outgoing way requirement. It is a clean fit for projects that need Hager consistency without stepping up to a larger 12 way or 18 way enclosure.

Loading delivery information...