Sensor controlled bulkhead lighting with the flexibility of Navara SF Select

KSR Navara SF Select KSRSF332 is a round LED surface fitting designed for projects where automatic operation makes more sense than simple permanent switching. It uses the current Navara SF Select platform and adds an integral microwave sensor while keeping the core strengths of the range which are selectable wattage | selectable colour temperature | strong protection ratings and practical mounting flexibility.

KSR lists KSRSF332 as a Navara SF Select LED multi wattage 5CCT surface fitting with microwave sensor. Output can be set to 9W | 14W or 18W and colour temperature can be selected between 2700K | 3000K | 4000K | 5000K and 6000K. Light output reaches up to 2125 lumens at 18W and 4000K. That makes the fitting useful across a wide spread of circulation and ancillary applications because the same product can be set for softer lower output lighting or brighter more task oriented illumination depending on the space.

Why the microwave sensor version is useful

The key difference between KSRSF332 and the standard Navara bulkhead is the integral microwave sensor. That gives the fitting automatic switching behaviour for spaces where people come and go rather than occupy the area continuously. In practical terms that makes it a good fit for landings | corridors | stairwells | service routes and similar areas where manual switching is inconvenient and constant operation is often unnecessary.

Using a dedicated sensor version can also help reduce specification clutter. Instead of moving to a separate lighting family for sensor control you can keep the same Navara body and trim system across the wider project. That matters for schemes where standard | emergency and sensor-controlled areas all need a consistent appearance.

Selectable output and CCT give more freedom on site

One of the strongest points in the Navara SF Select range is that it helps installers carry fewer product codes. KSRSF332 can be configured at installation rather than forcing you to order separate fixed output and fixed CCT versions. KSR specifies five selectable colour temperatures from warm 2700K through to cool 6000K together with three output levels. That allows the fitting to adapt to different room uses and finishes while keeping one core stock line.

KSR also lists the circuit wattage including driver losses at 9.58W | 13.93W and 17.31W with corresponding circuit currents of 0.076A | 0.109A and 0.131A. For technically minded buyers these figures help give a clearer picture of how the product behaves in use and during circuit planning.

Built for tougher locations than a decorative wall light

KSRSF332 uses a polycarbonate body with a polycarbonate diffuser and ABS rim. IP65 ingress protection and IK10 impact resistance make it suitable for locations where a more resilient fitting is needed. KSR positions the range for both indoor and outdoor applications depending on the chosen rim. The fitting can be wall or ceiling mounted and includes multiple cable entry options from the side or rear together with BESA box mounting support.

Those details make the product well suited to real project work. It is not just a sensor fitting in a simple decorative shell. It is a proper bulkhead platform designed for communal areas | service zones | covered exterior routes and other environments where durability and installation flexibility matter.

Trim options and project consistency

KSR supports the Navara SF Select range with optional rims including plain | eyelid and grille styles. Selected trim options include conduit entry knockouts. That makes it easier to keep the same fitting body across a scheme while changing the visible finish or cable approach to match the location. For buyers managing repeated installation work or refurbishment projects that flexibility adds real value.

Where KSRSF332 fits best

KSRSF332 is a strong choice for corridors | landings | shared entrances | stairwells | storage routes and utility spaces where sensor led operation improves convenience and can help limit unnecessary run time. It is also a sensible option where a project needs to stay within the Navara family for visual consistency but still wants automatic activation in selected areas.

Overall KSRSF332 is a well judged sensor bulkhead. It combines robust construction | flexible light settings and movement led operation in one current KSR range which makes it easy to specify and useful across a wide range of day to day applications.

Loading delivery information...