What the SolaX Triple Power 5.8kWh TP58 Slave Battery V3 is

SolaX Triple Power 5.8kWh TP58 Slave Battery V3 is the add-on battery module for the TP58 V3 high-voltage storage platform. The model identifier used in channel listings is HV11550(H) V3. Unlike the master version, this unit does not include the integrated battery management system needed to start the stack. Its job is to expand an existing or simultaneously specified TP58 system that already includes a compatible master battery.

That distinction is the key buying point. A lot of ordering mistakes in modular battery ranges come from customers seeing the same headline capacity and assuming each unit can work as a standalone battery. That is not the case here. TP58 Slave Battery V3 is an expansion module only. It requires a TP58 Master battery to operate and should be specified with that dependency in mind.

For buyers who already understand the master and slave logic, the appeal is simple. It adds another 5.8kWh nominal module to the system while staying within the same battery family, same voltage class, and same overall mechanical format. That makes it a practical way to scale storage in steps rather than replacing an entire battery setup.

Who it suits

TP58 Slave Battery V3 suits homeowners, installers, and procurement teams who need more storage within an existing SolaX TP58 installation or who are planning a larger TP58 stack from the outset. It is especially useful where the original battery system was sized conservatively and later usage patterns show that more evening storage or daytime solar capture would be valuable.

It also suits staged upgrades. A customer may start with one master battery and then decide that extra storage would improve self-consumption, reduce peak-period import, or support a wider set of household loads during battery discharge periods. In those cases, adding a slave battery is often a cleaner route than changing to a different product family.

Channel information also presents the V3 battery as compatible with TP58 Master batteries in both V2 and V3 form. That matters for installed-base upgrades because it points to a route for replacing or extending older TP58 systems without necessarily rebuilding the whole battery architecture from scratch.

Key features and practical benefits

Modular 5.8kWh expansion

Each slave battery adds 5.8kWh nominal capacity to the system. That modular approach is useful for buyers who want to size storage around real consumption rather than guess upfront. Instead of jumping to an oversized battery bank on day one, the system can be increased in measured steps.

95% depth of discharge

SolaX product material for the V3 range states 95% depth of discharge. In practical terms, that improves usable energy from each added battery module. For customers focused on self-consumption, evening loads, or better use of exported solar, usable energy matters more than the headline number alone.

LiFePO₄ chemistry and 6000+ cycles

LiFePO₄ chemistry and a cycle life above 6000 cycles make the TP58 Slave V3 appropriate for regular daily cycling rather than occasional use. That is important in storage systems designed to charge and discharge routinely as part of normal household energy management.

IP66 enclosure and built-in heating

Current TP58 V3 product information highlights IP66 protection and built-in battery heating. For UK applications, that makes the battery easier to position in a broader range of install environments, subject to the manufacturer’s installation guidance. It also gives buyers a clearer cold-weather proposition than older battery modules that may rely on more limited environmental support.

Consistent platform expansion

Staying within the same TP58 family helps preserve consistency across the stack. Mechanical format, chemistry, and general system behaviour remain aligned. That is a real advantage compared with trying to mix unrelated battery products or forcing a system redesign after the initial install.

Technical details that matter in practice

SolaX and channel product data list the slave battery model as HV11550(H) V3 with LiFePO₄ chemistry, 5.8kWh module capacity, dimensions of 474 x 715 x 150mm, and weight of 59.5kg ±1kg. The matching current TP58 V3 datasheet also lists CAN 2.0 and RS485 communication at system level, recommended charge and discharge current of 25A, maximum charge and discharge current of 35A, and more than 6000 cycles.

Environmental data in the current datasheet points to IP66 ingress protection and support for floor or wall mounting. SolaX also highlights flexible two-level battery heating in V3 product material. For installers, that means the V3 generation is aimed at a more resilient deployment profile than a basic indoor-only battery module.

The slave battery shares the same nominal 5.8kWh per module as the master-led system platform. Total system capacity depends on how many matching batteries are installed, what inverter platform is used, and whether the project is single-phase or three-phase. Channel guidance notes a minimum requirement of one TP58 Master battery, then expansion with slave batteries as allowed by the intended system architecture.

Installation and fitment considerations

The most important installation point is that a TP58 Slave V3 cannot operate on its own. A TP58 Master battery is required. That should be made clear in catalogue copy, quotations, and picking notes so the wrong product is not ordered as a standalone battery.

Battery count limits are also important. The reseller technical content states a minimum requirement of one TP58 Master battery, with single-phase systems supporting one master plus up to two slave batteries, while three-phase systems support one master plus up to five slave batteries. That means the same slave battery can sit within different project sizes, but the permitted quantity depends on the inverter type and overall architecture.

Another fitment point is compatibility with older systems. Channel guidance states that T58 V3 batteries maintain compatibility with existing V2 systems, allowing replacement or expansion. That can be commercially helpful on upgrade jobs. At the same time, the same source states that the TP58 V3 is not compatible with the current SolaX BMS Parallel Box G2, so larger parallel-box concepts need checking before a purchase order is raised.

Because each module weighs 59.5kg ±1kg, handling and mounting method still need to be planned properly. Wall mounting may suit some plant rooms and garages, while floor mounting may be simpler where load-bearing wall structure or access is less favourable.

Compatibility and pairing logic

At system level, the TP58 Slave V3 is positioned for use with SolaX high-voltage hybrid inverters. TP58 battery bundles in channel listings pair the range with X1 Hybrid G4 5.0kW, 6.0kW, and 7.5kW inverters, which provides useful real-world pairing evidence. SolaX knowledge-base material also discusses TP58 selection with X1 and X3 Hybrid G4 platforms. That supports confident merchandising for compatible SolaX storage projects.

The first and most important pairing, though, is the correct one inside the battery family itself. TP58 Slave V3 works with TP58 Master batteries, and reseller technical content explicitly states compatibility with TP58 Master batteries in both V2 and V3 form. That gives the product a clear role in both fresh installs and certain upgrades.

For LAMPS internal navigation, the product sits naturally within solar batteries and the wider SolaX range. Buyers who need the system starter unit rather than expansion capacity should be directed towards the appropriate TP58 master battery. Customers researching the older generation may also compare against the earlier TP58 Slave Battery V2.

Why this variant may be the right choice

TP58 Slave Battery V3 is the right choice where more capacity is needed but the existing or planned system already uses the TP58 high-voltage platform. It keeps the expansion path simple, avoids unnecessary product-family changes, and supports a more measured way to build storage over time.

V3 is also easier to justify than a generic expansion module because its documented feature set is meaningful. You are not only adding nominal capacity. You are adding a module with high usable energy through 95% depth of discharge, LiFePO₄ chemistry, a strong claimed cycle life, built-in heating, and a current IP66 rating. That makes it easier to position for buyers who want a genuine upgrade rather than a like-for-like old-spec add-on.

FAQ

Loading delivery information...