The Sync Energy Pro Charger Twin EVPCWSM27BGR-01 is a wall mounted dual socket EV charger rated at 2 x 7.4kW on single phase. It is designed for commercial charging locations that need two Type 2 outlets from one wall mounted unit, with built-in 4G, RFID, integrated MID meters and a touchscreen user interface. The verified manufacturer part number is EVPCWSM27BGR, with the LAMPS SKU retained as EVPCWSM27BGR-01 for import matching. The charger uses Type 2 sockets with auto-lock and supports in-app charging, RFID, free vend and payment terminal charging when the payment terminal version is selected. For installers and site operators, the value is a compact dual charging point with load balancing, overcurrent protection, PEN fault protection and loop-in loop-out input terminations up to 35mm² cable.

• Wall mounted twin EV charger for commercial use
• Single-phase EVPCWSM27BGR output: 2 x 7.4kW
• Two Type 2 socket outlets with auto-lock
• Built-in 4G connectivity, RFID and integrated MID meters
• Payment terminal available on EVPCWSM27BGRP variant
• IP65 rated with IK10 body and IK08 screen
• Dimensions: 625mm high x 333mm wide x 210mm deep

Dual charging from one wall unit

The 2 x 7.4kW version is the single-phase wall mounted twin charger in the Pro Charger range. It is suited to car parks, workplaces, hospitality settings and fleet parking where two vehicles need controlled AC charging from one installed unit. The dual outlet format reduces the number of wall units required while keeping each outlet as a Type 2 socket with auto-lock.

The datasheet lists a 100A maximum input for the single-phase wall mounted version and 32/64A output across the two 7.4kW sockets. The charger includes built-in MCB overcurrent protection, RCD protection, PEN fault protection and integrated Class B MODBUS MID meters. That package is important for commercial installs because metered charging, protection and access control are usually part of the same site requirement.

RFID, 4G and payment terminal choices

EVPCWSM27BGR includes 4G connectivity, RFID and MID metering as standard. The EVPCWSM27BGRP sibling adds a payment terminal for contactless payment. Both variants retain the same single-phase 2 x 7.4kW Type 2 socket charging format, so the buying choice is about payment collection rather than output power.

Charging control options include in-app control, RFID, free vend and contactless payment where the charger with payment terminal is specified. That gives site operators a route for staff-only access, free customer charging or payment-enabled charging from the same product family. The charger also supports Monta QR code use, which helps operators connect the charge point to a suitable commercial charging platform where the project requires it.

Protection and accessibility requirements

The Pro Charger Twin wall model is listed as PAS 1899:2022 compliant when installed as per guidance. The charger includes built-in 30mA AC Type A and 6mA DC RCD protection, MCB overcurrent protection, PEN fault protection, weld detection, temperature monitoring and two-layer anti-tamper detection. Those features are central to commercial charger specification because site owners need accessible operation and protected AC charging in one unit.

The enclosure is made from stainless steel and polycarbonate, with an IP65 rating. The body is IK10 rated and the screen is IK08 rated. The operating range is -25°C to +40°C, and relative humidity is listed as 5 to 95%. The colour is black RAL 9005 with grey RAL 9006.

Wall mounting and cable capacity

The wall mounted Pro Charger has multiple wall fixing locations with fixing centres up to 375mm x 150mm. It supports daisy chain installation with loop-in loop-out input terminations up to 35mm² cable. That is a practical advantage on multi-charger sites where the distribution plan needs suitable cable entry and onward supply options.

The maximum input cable size is listed as 35mm². Electrical class is Class 1 with Class 2 insulated housing. Standby power dissipation is listed as 8W. For larger sites, plan this charger alongside the LAMPS commercial EV chargers range and relevant EV circuit protection.

Choosing 7.4kW, 11kW or payment versions

The single-phase EVPCWSM27BGR model provides 2 x 7.4kW. The three-phase EVPCWSM211BGR model provides 1 x 22kW or 2 x 11kW on a 400-415V supply. Payment terminal versions add the P suffix, with EVPCWSM27BGRP for the single-phase 2 x 7.4kW payment terminal model and EVPCWSM211BGRP for the three-phase 2 x 11kW payment terminal model.

Choose the 2 x 7.4kW version where the site is single phase or where each bay only needs 7.4kW AC charging. Choose the 2 x 11kW version where a three-phase supply is available and vehicles can use higher AC charging rates. Choose the payment terminal variant where contactless payment is part of the charging offer.

Pro Charger Twin questions buyers ask

Loading delivery information...