The Sync Energy Pro Charger Twin parent SKU EVPCWSM27BGR-01 is a configurable wall-mounted commercial EV charger page covering 2 x 7.4kW on a 220V to 240V single-phase supply or 2 x 11kW on a 400V to 415V three-phase supply. Both power options use two auto-lock Type 2 sockets in an IP65 enclosure, with contactless payment available as a separate selectable variant. It suits workplaces, hospitality, fleets, public parking and managed developments where two bays are positioned close to one wall-mounted unit.

• Selectable 2 x 7.4kW or 2 x 11kW charging output
• 220V to 240V single phase or 400V to 415V three phase
• Two auto-lock Type 2 charging sockets
• 4G, Wi-Fi, Ethernet, RFID and OCPP connectivity
• 30mA Type A, 6mA DC, MCB and PEN protection
• 625mm high x 333mm wide x 210mm deep, IP65
• Integrated MID meters with optional payment terminal

How do the selectable variants map?

EVPCWSM27BGR is the 2 x 7.4kW single-phase model without payment. EVPCWSM27BGRP adds the contactless terminal to that power configuration.

EVPCWSM211BGR is the 2 x 11kW three-phase model without payment. EVPCWSM211BGRP combines the three-phase output with the contactless terminal.

The selected option must update the visible power, phase, manufacturer code, payment hardware, price and availability. Shared family copy should not imply that every combination includes payment or uses the same incoming supply.

Where does the twin wall unit fit?

The enclosure serves two adjacent bays from one wall position. This can reduce the number of separate charger bodies while retaining an individual socket, meter and controlled session for each vehicle.

Each driver uses a suitable Type 2 Mode 3 cable. The mounting location should allow both leads to reach their vehicles without crossing the neighbouring bay, a doorway or a principal pedestrian route.

The body is rated IK10 and the touchscreen area IK08. Physical impact protection should still be considered where vehicles manoeuvre close to the wall.

What must the supply and cabling provide?

The 2 x 7.4kW selection requires a suitable 220V to 240V single-phase supply, with the manufacturer data listing a maximum 100A input for that wall-mounted version. The 2 x 11kW model requires a correctly designed 400V to 415V three-phase supply.

Loop-in and loop-out input terminations accept conductors up to 35mm². Cable sizing must still account for installation method, grouping, ambient conditions, route length, voltage drop and the exact selected variant.

Built-in protection includes Type A AC and DC residual-current monitoring, overcurrent protection, PEN fault detection and temperature monitoring. Site isolation, upstream distribution and any external load-balancing equipment remain part of the project design.

Loading delivery information...