The Fastensol F-TH02 flat tile roof hook, manufacturer article TH02, is a portrait fixing component for Fastensol GS Roof rail systems on suitable pitched flat tile roof installations.

• LAMPS sellable SKU F-TH02 and Fastensol article TH02
• Flat tile roof hook for portrait PV mounting layouts
• Verified hook geometry includes 30mm a, 190mm b, 166mm c, 80mm d, 30mm e, 30mm f and 5mm g
• Used as a roof connection point for Fastensol GS rail
• Fastensol GS Roof system data lists roof slopes up to 60 degrees
• Fastensol GS Roof system supports portrait and landscape module orientation
• Fastensol installation guidance states installation is for professionally trained installers

Where does F-TH02 fit?

F-TH02 is the flat tile portrait hook in this Fastensol group. The LAMPS SKU is F-TH02 and the Fastensol article reference is TH02, so both identifiers should stay visible for installers matching supplier paperwork, project schedules or Fastensol documentation.

The main selection point is the roof covering. This hook is not the same as the F-TH01 pantile hook or the TH04 slate hook. It should be chosen only where the roof survey confirms a compatible flat tile application and the fixing layout suits the TH02 geometry.

How does it support the mounting rail?

The hook creates the mechanical connection between the roof structure and the GS rail. Once the hook is fixed to suitable timber, the rail can be secured to the hook and the module clamps can then hold the framed solar panel to the rail.

Fastensol’s pitched roof system uses hooks, rails, splice components and clamps as a matched assembly. F-TH02 should therefore be ordered as part of a complete mounting design rather than used as a substitute for a different roof fixing.

What should the roof survey confirm?

The installer should check tile type, tile condition, rafter position, timber quality, roof pitch, rail span, planned module orientation, wind action and snow action. The fixing point needs to provide proper support while allowing the tile covering to sit correctly after any required adjustment.

Fastensol guidance also makes clear that unsuitable structures should not be used. Rotten, undersized or poorly aligned supporting timbers can affect the safety and warranty position of the installation.

Ordering and system matching

Use F-TH02 with compatible Fastensol GS rail, universal clamps, rail splices and end caps where specified by the project layout. For related parts, browse Fastensol GS Roof or the wider solar mounting systems range.

Loading delivery information...