The Hager MTN132 is a 32A B curve single pole miniature circuit breaker with 6kA rated short-circuit breaking capacity in a 1 module DIN rail body. It is intended for compatible Hager boards where the final circuit design calls for 32A overcurrent protection.

• 32A rated current with B curve tripping characteristic
• 6kA rated short-circuit breaking capacity to IEC 60898-1
• Single pole 1P format in a 1 module body
• 230 to 400V AC rated operational voltage and 50 to 60Hz frequency
• Screw terminal top connection and biconnect bottom connection
• 70mm depth, 17.5mm width and 83mm height
• IP20 protection with 1 to 35mm² rigid and 1 to 25mm² flexible conductor capacity

Where does a 32A MCB fit?

MTN132 should be used only where the design calls for a 32A B curve MCB. The installer must confirm load, cable size, installation method, grouping, disconnection requirements and fault level before fitting it.

How does MTN132 differ from ADB932R?

MTN132 is an MCB, while ADB932R is an RCBO. The MCB protects against overload and short circuit, but it does not provide 30mA residual-current protection in the same device.

Why give MTN132 its own page?

32A MCB searches are often exact and part-number led. A dedicated MTN132 page helps buyers find the Hager 32A B curve MCB without landing on a 32A RCBO or a generic circuit-protection page.

Loading delivery information...