The Rolec Quantum Ground Mounting Base is the dedicated ground mounting accessory for Quantum EV charging pedestal installations.

GMQR0011 is listed by Rolec as the ground mounting base for the Quantum pedestal. Quantum is a freestanding EV charging range for car parks, workplaces, development sites and public locations, with one or two Type 2 socket options and 7.4kW or 22kW charger variants. The base is specified when a Quantum pedestal needs to be fixed as part of the ground layout rather than mounted to a wall. It should be selected during project design because it affects charger position, ducting, cable route, driver access, bay protection and signage. The supplied product set identifies this SKU as the Quantum galvanised steel ground mounting base, while the verified Rolec accessory list confirms its use as the Quantum pedestal ground base.

• Rolec product code GMQR0011
• Ground mounting base for Quantum pedestal
• Accessory for Rolec Quantum EV charging installations
• Used with freestanding Quantum pedestal layouts
• Relevant to one-socket and two-socket Quantum variants
• Supports charger setting-out before final bay surfacing
• Supported by Rolec accessory warranty terms

What does GMQR0011 fit?

GMQR0011 fits the Rolec Quantum pedestal range. Quantum is a freestanding commercial EV charging product with single-phase 7.4kW and three-phase 22kW variants, plus model-dependent contactless payment and LCD screen options. The ground mounting base is used with that pedestal family, so it should be ordered only after the Quantum charger variant has been identified.

The same base concept applies across Quantum user-interface variants, but the charger body and bay arrangement still need checking. A contactless payment or LCD version may require different user approach and visibility considerations from a simpler smart pedestal. The base should therefore be positioned from the final charger model, not from a generic pedestal assumption.

Planning the Quantum bay position

Quantum pedestals are often used where the chargepoint needs to stand in a car park or development bay rather than on a building wall. That makes the base location part of the first-fix site design. The installer should check where the supply duct will rise, where the pedestal door or fascia needs to face, how the driver will approach the socket and whether a protection barrier is required.

The base should not be placed solely from the centre of a parking bay. Cable reach, user access and future maintenance all matter. Where two sockets are fitted, the pedestal may serve two adjacent spaces, so both cable routes should be considered. The final position should also work with line marking and EV signage. A suitable EV parking sign can support identification once the bay is in use.

Using it with Quantum variants

The Quantum range includes standard smart, contactless payment, LCD and combined LCD payment options. GMQR0011 remains a mounting accessory rather than a control or payment component. It should be paired with the exact charger specification, then included in the installation materials list alongside circuit protection, signage and barrier requirements.

For simple app or RFID controlled charging, the standard Quantum pedestal may be enough. For visitor or public-facing bays, a contactless payment or LCD version may be selected. The base does not determine those user features, but it must still support the physical layout they require. For example, a screen or payment terminal should face the likely user approach, not a kerb or obstruction.

Choosing between Rolec base codes

Rolec uses different base codes for different charger families. GMQR0011 is for Quantum. GMCP0010 is for BasicCharge. GMHP0010 is for Hex pedestal and SecuriCharge post use in the supplied product set. GMUC4080 is for the UltraCharge 40/80 pedestal arrangement. GMTP0010 is for the Tap & Charge premium mounting pedestal.

Do not treat the base as a generic ground accessory. The charger family, mounting format and bay design decide the correct code. For a Quantum project, start with the Rolec Quantum smart EV charging pedestal, then select the appropriate base and any protection barrier needed for the site.

Quantum base questions

Loading delivery information...