The Rolec Type 2 Plug & Cable Holster is a storage accessory for Type 2 EV charging connectors and cables.

EVRS0030 is listed by Rolec on current product pages as a remote wall mount for a Type 2 plug or charge gun holster, and Rolec data sheet accessory lists identify it as a Type 2 plug and cable wall or post mount holster. It is used where an EV charging bay needs a defined place to return the connector or cable after charging. The holster does not set charger output, connector rating or phase. It supports the practical use of the bay by keeping the plug and cable from being left loose around the charger. It is relevant to socketed charging points using a separate Type 2 cable and to tethered layouts where connector storage is required. For a post-mounted route, pair it with the Rolec Type 2 plug and cable holster plate where required.

• Rolec product code EVRS0030
• Type 2 plug and cable holster
• Listed as a remote wall mount for Type 2 plug or charge gun holster
• Used for cable and connector storage at EV charging bays
• Wall or post mount route supported in Rolec data sheet references
• Post mounting may require EVFP0080 holster plate
• Supported by Rolec accessory warranty terms

Why add a cable holster?

A holster gives the user a clear place to return the Type 2 connector when charging is finished. Without a storage point, a loose cable can be wrapped around the charger, left on the floor or placed across a walking route. The holster helps keep the charging position more organised and makes daily use easier to repeat.

It is especially useful on socketed charger installations where the user brings a separate Type 2 charging cable. It can also be relevant on tethered layouts if the connector needs a dedicated return point. The holster should be placed where the cable naturally reaches after charging, not simply where it is easiest to drill.

Wall or post mounting routes

EVRS0030 is described in Rolec accessory information as a remote wall mount for a Type 2 plug or charge gun holster, with data sheet references also identifying wall or post mounting. Wall mounting is appropriate where the charger is near a suitable surface and the cable can be stored without crossing a route. Post mounting is useful where the charger stands away from a building.

If the holster is fitted to a post, EVFP0080 may be required as the Type 2 plug and cable holster plate for mounting post. That plate is a separate accessory, so it should be included in the installation schedule when needed. The installer should confirm the post, plate and holster together before arriving on site.

Where to place the holster

The holster position should be based on the cable length, charger location and vehicle inlet. A holster placed too far from the charger can make the cable difficult to return. A holster placed too close to a vehicle path may leave the connector exposed to impact. For tethered installations, the cable should be able to rest without strain on the plug or lead.

For socketed installations, the holster may be paired with a loose Type 2 cable kept at the bay. Where the cable is taken away in the vehicle, the holster still gives a useful return point when charging is active. For cable selection, see the Rolec Type 2 to Type 2 EV charging cable.

Choosing between holster and bundle options

EVRS0030 is the holster only. The supplied product set also includes Type 2 cable and holster bundle options, which combine a charging cable with the storage accessory. The holster-only item suits sites that already have the cable or where the cable is being selected separately.

Choose the holster-only route where a replacement storage point is needed, where the cable rating has already been specified, or where the installer wants to match the holster to a post-mounted accessory route. Choose a bundle where the project needs both a Type 2 cable and holster in one product selection.

Type 2 holster questions

Loading delivery information...